How To Reset The Brake Service On 2012 B,w X5 E70

Download Article

Download Article

Servicing y'all BMW requires y'all to besides reset the service light. The functioning for resetting BMW service lights is not the same across the range, so this is the order of operations for whatsoever X5 or X6 (E70 or E71)

Steps Download Article

1. 1

   Insert your remote key into the key slot. Next press the 'Start Stop' push one time without putting your foot on the brake. You should see numerous lights turn on in the dash.^[1]

2. 2

   Wait for any warning lights to get out. In some cases, such as a depression fuel warning lite, you may need to press the 'BC' button on the end of the indicator stalk once to remove them.

   Advertisement

3. 3

   Printing and hold the black push button. Information technology is located on the lesser left of the speedometer (musical instrument cluster). An assertion mark will appear in the screen in centre of the speedometer, but keep holding down the button until the next picture appears- then let get.

4. iv

   Wheel through the images. Ane past one, become through all of the picture options for each service. When you arrive at the service that you wish to reset printing and concord the black button until the text 'Reset?' is visible under the picture, then allow go. Finally printing and hold the push button again to confirm the reset.^[ii]

5. 5

   Choose a service option. Two service options which may be visible on your dash require resetting to a hereafter date (statutory vehicle inspection and statutory frazzle gas inspection). This is done similarly by pressing singularly to coil though the numbers and a long press to ostend your selection. Likewise I have had instances where statutory inspections volition non reset. In Commonwealth of australia neither of these services are required and they can be removed at whatever BMW dealership, if you tin't reset them manually you'll have to visit the dealer.^[3]

Advertisement

Add New Question

• Question

  How exercise I reset the brake light indicator on a BMW X5? The last possessor replaced the pads but never reset the light.

  

  You'll probably need to buy a new sensor. Yous simply demand one, I believe in the commuter'southward side. After installing that, then reset. The sensor isn't as well expensive.

• Question

  How do I reset the airbag dash light?

  

  Unplug your battery for xxx minutes, and so plug information technology back up. Information technology should reset with no problem.

• Question

  What practise I do if I'thou however getting the 4x bulldoze malfunction alarm bulletin?

  

  Try this to fix it: Start the vehicle, turn the cycle all the way to the left and then back to center, whilst stepping on brake pedal.

Ask a Question

200 characters left

Include your e-mail address to get a bulletin when this question is answered.

Submit

Advertisement

• Don't reset services which you haven't performed, especially not brake services. If y'all endeavour to reset a brake service warning without replacing the restriction pad warning sensor along with the brakes the vehicle volition log a fault code which can only be reset at a BMW dealership. Too don't use this info for dishonesty, yous'll only be pain yourself or others.

Advertisement

About This Commodity

Thanks to all authors for creating a folio that has been read 270,752 times.

Did this article help you?

How To Reset The Brake Service On 2012 B,w X5 E70,

Source: https://www.wikihow.com/Reset-Service-Lights-BMW-X5-or-X6-(E70-or-E71)

Posted by: richardsonscance.blogspot.com

Share this post